GB -9
Software
The configuration settings in COMBIVIS 5.6 can be reached under the menu bar Edit -> Con
-
figuration -> DIN 66019.
Figure 2:
Configuration
In the menu item "Send single" remove the tick.
The driver has to install manually, see chapter "Manual Driver Installation".Excep
-
tion:The driver has already been installed automatically by COMBIVIS 6.
The COM port used by the USB converter must be entered. Located at Windows Control
Panel under Device Manager –> Ports (COM und LPT).Interface numbers can be selected
from 0 to 9. If the detected interface has a higher number, it must be renamed in the Device
Manager.
Only one USB converter can be used per PC.
