GB -8
Software
3.1
Manual Driver Installation
1.
The *.inf-file must be assigned once to the system on the PC.
The installation must be made separately for each USB port.
2. The assistent for new hardware opens automatically, if the converter is connected to
a not yet configured for USB serial converter.
3.
The USB-inf-file is located in a „USB driver package“. The „USB driver package“ can
be downloaded under www.keb.de -> Download -> Search for: „USB driver pack
-
age“. Extract the “USB driver package” files after the download.
4.
Set the path in which the "kebcdc.inf" and kebcdc.cat files are found.
5. Finish the installation.
Computers with Windows 7 do not ask for a driver because a ST Electronic driver
is automatically installed by the system. The function is given, but is recognized
as USB converter, not as KEB unit.If required it can be replaced manually.
With the KEB-USB converter the parameter files can not be read-out with COM
-
BIVIS 5 from the F5 when connected via HSP5.
3.2
Use among Combivis 5.6
When using the USB serial converter KEB under COMBIVIS 5.6 some things to consider:
The communication settings are run in serial protocol DIN 66019, even if the converter is con
-
nected to an interface of a HSP5 COMBIVERT F5 or COMBIVERT B6. The protocol HSP5 is
always converted to DIN 66019.
The RTS delay must be set between 3000ms and 5000ms. By the delay transmission of the
data is somewhat slowed, whereby the converter has sufficient time to process the data.
