22
SySTEM DESCrIPTION
2.3.1.2 Key system identity
Non-volatile memory for system identification data storage.
Figure 3:
Non-volatile memory
2.3.2 fanless
A special attention has been given to the thermal aspects of the system in order to avoid
the use of fans, with the target of reducing the amount of moving parts and the incidence
of failure in the life of the system.
2.3.3 LCD LED backlight
LCD with LED backlight technology; the system is equipped only with the new generati-
on LCD with LED technology.
2.3.4 Mass Storage
CFast, 1 x bootable CFast SATA III slot on board with
external access
Internal SSD mSATA, 1 x mSATA SATA III internal con-
nector for direct insertion of mSATA SSD
Figure 4:
Mass storage
2.3.5 Extension slot & add-on
The system can be optionally equipped with KEB design add-on cards. They provide
additional resources for the system.
Add-on
Position A, one board between:
1 x RS232/422/485 optoisolated (DB15M) + 1 x USB 2.0
Table 1:
Expansion slot & add-on