background image

1-800-KEATING

 

|

   

TEPPANYAKI GRIDDLE

5

CLEANING THE TEPPANYAKI GRIDDLE

The Miraclean® surface of the Teppankayi Griddle is 
very durable and with proper care, following the proce-
dures below, will last many years.

A sample of Keating Klenzer, Keating palmetto brush 
and a 4" scraper are included with each new griddle.

1. Scrape Teppanyaki chromium surface with the 
Keating Scraper. 

2. Clean your Miraclean® Griddle while hot at      
300°F to 350°F. Using a plastic pitcher, pour water 
ahead of a palmetto pot brush. Then scrub the griddle  
clean with the pot brush sweeping the water into   
the drain trough.

3. Sprinkle with Keating Klenzer. Polish with a 
soft cloth (towel). It will sparkle like new in just a few 
minutes. Rinse with potable water to remove 
excess Keating Klenzer. Proper care should be taken 
to fully clean the griddle on a regular basis.

CLEANING THE UTENSILS

Spatulas

 should be hand washed 

in mild to medium strength deter-
gent and towel dried. 

NOTE:

 Avoid contact with 

Chlorine or bleach, it will discolor 
the steel spatula. Rubbing the 
spatula with vegetable oil will 
slow discoloration.

Rinse 

scraper

 and carefully 

wipe blade with a dry cloth. 
Cover blade with plastic 
protection cover when not 
in use.

Rinse Palmetto brush until 
clean.

NOTE: BECAUSE OF THE SUPERIOR MIRACLEAN® 
SURFACE, THE ONLY TOOLS YOU WILL EVER 
NEED TO CLEAN THE GRIDDLE ARE A NATURAL 
BRISTLE BRUSH AND A KEATING SCRAPER.

 

 

NEVER USE A GRIDDLE STONE, BRICK OR 

SCREEN TO CLEAN THE TEPPANYAKI MIRACLEAN® 
SURFACE.

  

 

DAMAGE DONE TO THE TEPPANYAKI SURFACE BY 

GRIDDLE STONE, BRICK OR SCREEN WILL VOID THE 
WARRANTY.

 

 

THE DAMAGE DONE TO THE TEPPANYAKI SURFACE 

IS IRREPARABLE.

 

NEVER USE ICE TO COOL THE TEPPANYAKI 

SURFACE. USE OF ICE MAY WARP THE TEPPANYAKI 
SURFACE.

 

 

USE ONLY KEATING SUPPLIED CLEANING TOOLS 

AND KLENZER.

NOTE: 

Keating Klenzer MSDS is available on our 

website.

CLEANING THE TEPPANYAKI GRIDDLE POLISHED 
STEEL SURFACE

To clean polished steel surface use griddle stone or 
screen with Keating Klenzer. Rinse with potable water 
to remove excess Keating Klenzer. Put a light coating 
of oil on the polished steel surface to prevent rusting.

SHUTDOWN

Turn each thermostat fully counterclockwise and On/
Off switch to “OFF” position.

MAINTENANCE

WARRANTY REPAIRS

Keating’s warranty begins with the date of installa-
tion. In the event that your Teppanyaki Electric Griddle, 
under warranty, needs repairs other than routine 
maintenance or cleaning, you are required to contact 
Keating of Chicago (at 1-800-KEATING) before calling a 
local service company.

GRIDDLE
SCRAPER

HAMBURGER 
SPATULA

Summary of Contents for Teppanyaki Griddle














Reviews: