Keating Of Chicago MIRACLEAN, Service & Preventative Maintenance Training

Page: 49 / 63

Setting the Digital Timers
Programming
Each timer may be set for a total
of 3 times. To program the timer,
it must be in the idle mode.
Press and hold the set button for
approximately two seconds. The
display will show “SET”. Press
the button for the channel to be
programmed (T1, T2 or T3).
The display will show the current
setting for that channel. Use the
up or down button to increment
or decrement the setting. When
the setting is correct, press and
hold the set button again for
approximately two seconds.
The display will show “StO” and
the timer will return to normal
operation. Repeat this process
for setting the 2 additional times.
• Standard feature with Auto-Lift
47