KE RT Series UPS 6-10kVA UL 208-220-230-240Vac User Guide English 20180130 This manual is for qualified personnel only
- 31 -
5.4.10
Parallel ID setting
Parallel ID setting – Note: the area marked by the broken-line will be flashing.
Within the bypass voltage lower limit setting press DOWN or within parallel quantity setting press
UP, to go to the parallel ID setting.
•
Use button ENTER/ON to set the different parallel ID. The parallel ID range is 1~4.
•
Press ESC/OFF button to exit the parallel ID setting (save the parallel ID setting) and goes to
bypass lower limit setting or parallel quantity setting.
NOTE: Parallel cable cannot be connected when setting the parallel parameters.
5.4.11
Parallel quantity setting
Parallel quantity setting – Note: the area marked by the broken-line will be flashing.
Within the parallel ID setting press DOWN or within parallel redundancy quantity setting press UP, to
go to the parallel quantity setting.
•
Use button ENTER/ON to set the parallel quantity. The parallel quantity range is 2~4.
•
Press ESC/OFF button to exit the parallel quantity setting (save the parallel quantity setting)
and goes to parallel ID setting or parallel redundancy quantity setting.
