KE RT Series UPS 6-10kVA UL 208-220-230-240Vac User Guide English 20180130 This manual is for qualified personnel only
- 26 -
5.4.1
Mode setting
Mode setting – Note: the area marked by the broken-line will be flashing.
•
Use button ENTER /ON to choose different modes. There are 4 different modes for setting:
ECO, PAL, NOR, CF.
•
Press UP & DOWN to exit the mode setting (save the mode setting), and move to output
voltage setting or parallel redundancy quantity setting.
5.4.2
Output voltage setting
Output voltage setting – Note: the area marked by the broken-line will be flashing.
Within the mode setting press DOWN or within the frequency setting press UP, to go to the output
voltage setting.
•
Use button ENTER/ON to choose the different output voltage. There are 4 different voltages--
-208,220, 230, 240.
•
Press ESC/OFF button to exit the output voltage setting (save the output voltage setting) and
goes to mode setting or frequency setting.
NOTE:When powered by inverter, it is necessary to turn off the inverter before setting voltage and
frequency level.
