background image

HD V

iew4

2

Introduction

Included in this package:
•  One KD-ADA4 HD View4
•  One external power supply
•  One 75 Ohm terminator
•  One Operating Manual with included Warranty statement

The 

KD-ADA4 HD View4

is a very versatile and novel Distribution Amplifier

(DA) that will suit your needs for crystal-clear distribution of HDTV and SDTV
Component Video (YPrPb) or Composite Video (CV) sources to Component
Video "HDTV-ready" monitors, or Composite Video monitors.  Signal process-
ing circuitry permits excessive distribution cable runs of up to 1000 feet, sim-
ply by adjusting the front-panel knobs.  And you can drive four component or
composite monitors simultaneously.  Each unit handles Left and Right stereo
audio, or digital PCM audio. 

HD View4 provides so much flexibility, yet will not degrade the image quality
of your input signals.  Each unit can be cascaded to other KD-ADA4, KD-DA6,
or KD-CDA12 DA’s by Key Digital Systems, to drive as many outputs as
desired from one source.  HD View4 has an added feature (via internal DIP-
switch control) whereby you can distribute only Composite Video (CV) or digi-
tal PCM audio inputs to as many as 24 destinations.

DISTRIBUTION AMPLIFIERS

Tech Support: Toll Free USA/Canada 888-258-2028  [email protected]

Customer Support: 718-796-7178 Ext. 23 [email protected]

Manual for

HD View4

Product Overview

Why do you need a Distribution Amplifier?

For installations where you need to distribute your HD and SD video and analog or dig-
ital audio to more than one destination, you need a high-quality Distribution Amplifier
(DA).  Perhaps you have a configuration where you need to distribute an HDTV Set
Top Box output to several different display monitors.  You’ll want to feel confident that
the DA introduces little or no degradation to your signals. 
Our DA’s produce crystal-clear images which do not harm your input signals, can drive
long cables (typically up to 300 feet, and our ADA4 which can drive up to 1000 feet),
and can be cascaded to accommodate future expansion requirements.  Let us help you
choose exactly the right DA for your specific installation application.
The KD-ADA4 HD View4 Distribution Amplifier offers versatility, convenience, and well
thought-out features:

Summary of Contents for HD View4









Reviews: