9
e01_c276_9e.fm
[9/17]
G
e
ttin
g Read
y
Replacing the Battery Pack
■
Removing the Battery Pack
>
Move the lock slider in the direction of the arrow.
>
Remove the battery pack cover by hooking a
fingertip (nail) on the concave portion and lifting
it up in the direction of the arrow.
>
Remove the battery pack by pulling up on the
protruding edge.
■
Attaching the Battery Pack
>
With the protruding edge of the battery pack
facing up, align the contacts on the battery pack
with those of the cell phone and then insert the
battery pack securely.
>
Insert the tab of the battery pack cover into the
groove of the cell phone (
A
), and then close the
battery pack cover properly (
B
).
>
Press along the battery pack cover in the direction of
the arrows, and make sure that it is closed properly.
>
Move the lock slider to the “LOCK” position in
the direction of the arrow.
Protruding
edge
Battery pack
Lock slider
Concave portion
1
3
2
• When removing the battery pack, always pull up on the
protruding edge. Doing otherwise may result in damage
to the contacts.
• When removing the battery pack, turn the cell phone
power off.
• Before attaching the battery pack, make sure that the au
IC-Card is inserted.
• When attaching the battery pack, make sure that the
battery pack cover is closed properly so that it does not
open so as to maintain water resistance.
• Failure to follow the correct procedure when removing
or attaching the battery pack may result in damage to
the battery pack or the battery pack cover.
Protruding
edge
Contacts
1
2
B
A
3
Lock slider
4
C276_e_basic.book 9 ページ 2011年2月23日 水曜日 午前8時38分