Saf
ety P
recautions
•
Do not splash water onto the desktop holder (sold separately),
specified charger (sold separately), or optional accessories when
using the equipment. Do not use the equipment in places where
water is regularly used such as a bathroom, shower room, kitchen,
and lavatory. Doing so may cause fire, electric shock, malfunction,
or injury.
■
Washing the Product
If any stain, dust, sand, soft drink, etc. is attached to the surface of the
product, gently wipe it off with a cloth and wash the product under a
mild water flow (up to 6 liters/min) of tap water at room temperature
(5°C to 35°C) approximately 10 cm away from the faucet or shower
head.
Hold the back cover so that it does not open, and wash the product
with your hands without using a brush or sponge. After washing the
product, drain water off and before using the product.
•
Make sure that the back cover is securely closed before washing the
product.
•
Do not wash the product with a washing machine or an ultrasound
bath.
•
The external connection jack section is especially subject to stain
such as dust or sand adhesion. Wash away stain carefully so as not
to keep it remaining in the sections. Also, after washing it away,
make sure the sections get sufficiently dried off before using the
product. Using the product with sand or water drops remaining in
the jack sections may cause fault.
•
When cleaning the external connection jack section, do not use tools
such as a cotton swab or jam a cloth into the jack sections. Doing so
may cause impairment of waterproof property etc., resulting in fire,
burns, or a fault.
•
Never put the product in a microwave oven for drying it. Doing so
may cause the battery pack to leak liquid, overheat, rupture or ignite.
Also, doing so may cause the product to overheat, emit smoke,
ignite or cause destruction of circuit components.
•
Do not expose the product to hot air from a hair dryer or leave it in a
high temperature environment for drying it. Doing so may cause the
product to deform, discolor, get out of order, etc.
■
Draining Water
If the product gets wet, make sure to drain water remaining in the
“external connection jack section”, “earpiece (receiver) section”,
“mouthpiece (microphone) section”, “speaker section”, “key section”,
“hinges (joint)”, etc.
1
Wipe off water on the surface of the product
carefully with a dry and clean cloth etc.
If a strap is attached, dry it sufficiently as well.
2
Hold the product securely at its hinges (joint) and
shake it approximately 20 times until there is no
more water splashing.
Make sure of the safety around you and shake the product while
holding it securely not to let it drop.
Hinges (joint)
Earpiece
(Receiver) section
28
