manualshive.com logo in svg

KbPort BPSim, User Manual

Share
Download
KbPort BPSim User Manual Download Page 4

 

 

 

 

Page 4 

www.kbport.com 

KbPort LLC  |  412.487.4663  |  [email protected] 

R0180928-03 

BPSi

m

™

 

Us

er 

Gu
id

e

 

Regulatory Information 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 

 
 
 

 

 

Federal Communication Commission Interference Statement: 

This device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions:  (1) This device may not cause harmful interference, 
and (2) this device must accept any interference received including interference 
that may cause undesired operation.

 

 

SAR Information: 

This wireless mobile and/or portable device has been shown to be compliant for 
localized specific absorption rate (SAR) for uncontrolled environment/general 
exposure limits specified in ANSI/IEEE Std.  C95.1-1999 and has been tested in 
accordance with the measurement procedures specified in IEE 1528-203, OET 
Bulletin 65 Supp. C, RSS-102 and Safety Code 6 

 

 

 KbPort

™

    

                     

                                    BPsim 

This Class A Digital Apparatus Complies with Canadian ICES-003 

Cet Appareil Num

érique de la Class A est á la norme NMB-003 du Canada ICES-003

 

 

 

 

KbPort

™

    

                    

                                    BPsim 

This Class A Digital Apparatus Complies with Australian and New Zealand 

Standard AS/NZS CISPR 11:2011

 

 

 

 

Summary of Contents for BPSim






























































Reviews:

No comments

Brands by name

Popular brands

Load more brands