Sets the transmission power for bluetooth.
Factory setting: 4
>
> 1 .. . 7
SERVICE\BLUETOOTH 02/02
Powerlevel
Submenu call with START/ENTER. Displays the
current firmware typ / variant.
SERVICE
04/11
FIRMWARE-TYP
> press enter
Submenu call with START/ENTER. Displays the cur-
rent firmware version of the system components.
Do not operate the system with different
firmware versions!
• All system components must be equipped
with an identical firmware version.
SERVICE
05/11
FIRMWARE-VERSIONS
> press enter
Submenu call with START/ENTER. Displays the first
and the last Software-Upload.
SERVICE
06/11
SOFTWARE UPLOAD
> press enter
Not available in this system.
>
SERVICE
07/11
RGB-Setup
SERVICE
08/11
SERVICE MODE
> press ENTER
Submenu SERVICE MODE.
Invoked by pressing
START (ENTER).
SUBMENU
SERVICE MODE
Service mode without tanning
Service mode with tanning
Troubleshooting mode.
The service mode is switched on for 30 minutes.
The mains voltage is connected. Error notifications
are ignored, but tanning cannot be started.
SERVICE
01/02
Service mode without tanning
> Start: press `ENTER` for 2s
Troubleshooting mode.
The service mode is switched on for 10 minutes.
The mains voltage is connected. Error notifica-
tions are ignored, tanning can be started. After this
period, there is a 3 minute restart lockout.
SERVICE
02/02
Service mode with tanning
> Start: press `ENTER` for 2s
O p e r a t i n g I n s t r u c t i o n s
|
megaSun space 2000
34
Summary of Contents for megaSun space 2000
