18
Operating Instructions KBL 7900/KBL 7000/KBL Convertible
Illustr. 5-1 Fixing the
canopy
Illustr. 5-2 Releasing the
canopy
Illustr. 5-3 Opening for
hook
5.2 Dismantling the acrylic panes
Dismantling the
pane in canopy
and lateral part
Remove the screws and tilt down the panes.
Always put the pane frame with a soft padding (e.g. a head
cushion) on the bed.
For service works, it is possible to take out the complete frame
in the lower position from its support.
Mount the pane in reverse order. Make sure that the frame is
correctly positioned in the hinge.
When closing the pane, all air nozzles must be matching their
counterparts. If not,
carefully
push the nozzles concerned into
their proper position.
Illustr. 5-4 Loosen screws
Illustr. 5-5 Opening the acrylic panes
Head cushion
used as a
padding
Base and duct
pane
The following table shows how to clean the base and duct pane.
The electronic parts installed underneath the bed must not get in
contact with any moisture.
Therefore, in order to clean the underside of the base pane, the
duct pane and the inner base section, use a slightly damp micro
fi bre cloth only.
