TUBE REPLACEMENT CANOPY / SIDE PART
⇒
Tilt the canopy and / or side pane down.
⇒
Remove the tubes.
P2 Tubes
If your tanning device is equipped with P2
tubes, maintenance and care intervals are equal to
the cycles for standard tubes.
Danger of destruction!
When installing / dismantling the P2 tubes, pay
attention to the middle holding clamp.
Tube arrangement for hybrid -
tanning devices
Hurricane - canopy/side tube
UV - canopy/side tube
Air nozzle
Hurricane - bench tube
UV - bench tube
The positions of Hurricane tubes are
marked on the reflector plates.
Facial tanners
4
↵
REPLACING THE HIGH-PRESSURE LAMP
Dirt accumulation and bad seating can
lead to damage during the operation.
• Make sure that tanners and high-pressure
lamps are correctly positioned in their respec-
tive holders. Make sure that the contact sur-
faces are clean when you insert the lamp.
• Insert the high-pressure lamps straight into
their holders.
• Never touch the lamp or the reflector with your
bare hands. If necessary, remove grease and
dirt with an alcohol-containing agent.
Attention
The high-pressure lamps must only be
installed and removed by trained technical
personnel.
⑰
⑯
⇒
Tilt the canopy and / or side pane down.
⇒
Remove the filter panes.
⑯
Grasp the high-pressure lamp by the upper
end. Use a clean cloth free from grease.
⑰
Carefully pull the high-pressure lamp out of
the socket.
Perfect T
an
+
Vi
ta
m
in
D
O p e r a t i n g I n s t r u c t i o n s
|
megaSun 7900
α
46
Summary of Contents for megaSun 7900 Alpha
Page 1: ...OPERATING INSTRUCTIONS ...
Page 2: ......
