background image

Variable section of the interior control panel 

(audio functions)

 

        

 

 

 

 

             

 

             

Studio

MP3 internal

This function is used to play the tracks of the internal 
MP3 player of the tanning device.
If the MP3 internal function has been activated, press 
the plus and minus buttons to browse through the 
individual tracks.

USB-Audio

USB is automatically activated as soon as a storage 
medium is connected to the USB port. This USB port 
is located above the preSelection control panel.
If you change the audio source later on, please 
note that you must re-activate USB before you can 
use it again. While USB is active, use the plus and 
minus buttons to select individual tracks. With a 
USB stick connected, all other audio symbols of the 
preSelection menu are inactive.

This function is used to play the studio music.
If the Studio function has been activated, you can 
press the plus and minus buttons to browse through 
the channels, provided that more than one channel 
is available.

Tracks

Tracks

MP3 external (AUX)

The right-hand side of the tanning devices head end 
is equipped with a cable with a 3.5 mm jack plug so 
that you can make use of external players, such as 
MP3 players, iPods, etc. In this way, you can connect 
the headphone jack of your player to the tanning 
device. Use the corresponding operating elements 
of the external player in order to select the desired 
tracks. With the “MP3 external” control element you 
have also access to a Bluetooth connected device.

  

 

 

 

     

  

 

 

 

     

Channel

Channel

MODEL: ACTIVATING AUDIO FUNCTIONS

S
E

L

E

C

T

ACTIVATE

AUDIO FUNCTIONS
There is a maximum of four audio sources 
available at the user’s disposal. If you 
change over to another source, you must 
activate it first. The activation is effected by 
pressing the 

 

or the 

 button (with the 

exception of USB audio). All inactive audio 
functions are marked with “OFF” on the 
interior control panel so that you can easily 
recognise the active audio source.

O p e r a t i n g   I n s t r u c t i o n s

 

|

 megaSun 7900 

α

21

Summary of Contents for megaSun 7900 Alpha

































































Reviews:

Related manuals for megaSun 7900 Alpha