8
8
i n f o @ k b g o o d i c e . c o m
2. Flushing the unit for the first time use
Plug the unit into power. You will hear 5 beeps if the reservoir is full.
Press and hold the Clean button for 3 seconds to start the cleaning cycle
for flushing process, the Clean LED starts flashing slowly (it takes 30
minutes to complete and the Clean LED goes off).
U
nplug the unit
when the flushing process is complete
.
Unhook the plugs/holders with drain tubes out of the unit back and l
ower
them to a bucket or sink.
Press and hold the release buttons on the connectors to disconnect the
plugs/holders and release water.
Reconnect and hook them back to the unit.
3. Making ice for the first time use
Add clean potable water to MAX WATER FILL following instructions above.
Plug the unit into power. You will hear 5 beeps if the reservoir is full.
