background image

15 

 

WARRANTY 

 
This Warranty extends only to the original retail purchaser, who must produce proof of purchase in 
order to validate any claim. This warranty is not transferable to anyone else. 
 
What does this Warranty cover? This Limited Warranty covers all parts of the bicycle to be free of 
defects in workmanship and materials. 
 
What must you do to keep the Warranty in effect? This Warranty is effective only if: 
- The bicycle is completely and correctly assembled. 
- The bicycle is used under normal conditions for its intended purpose, by a person that properly fits and 
is capable of controlling the bicycle. 
- The bicycle receives all necessary maintenance and adjustments. 
 
What is not covered by this Warranty? This warranty does not include labor and transportation charges.  
 
The bicycle is designed for general transportation and recreational use only. This Warranty does not 
cover normal wear and tear, paint, rust, normal maintenance items, personal injury, or any damage, 
failure, or loss that is caused by accident such as a punctured inner tube, improper assembly, 
maintenance, adjustment, storage, or use of the bicycle.  
 
This Warranty will be void if the bicycle is ever: 
- Used in any competitive sport. 
- Used for stunt riding, jumping, aerobatics or similar activity. 
- Installed with a motor or modified in any other way. 
- Ridden by more than one person at a time. 
- Rented or used for commercial purposes. 
- Used in a manner contrary to the instructions in this Owner’s Manual. KaZAM will not be liable for 
incidental or consequential loss or damage, due directly or indirectly from use of this product. 
 
For how long does this Warranty last? The frame is warranted for the usable life of the bicycle. KaZAM 
will replace the frame at no charge, should it fail in any weld point when the cycle has been used in a 
normal manner, and determined by our inspection team. KaZAM will also replace the bicycle fork if it 
should fail at any weld point. You must receive prior authorization from KaZAM Customer Service, 
before returning any product or parts. All other components are warranted against defects for six 
months from the date of purchase when properly assembled and used in a normal manner. 
 
What will KaZAM do? We will replace, without charge to you, any frame, fork, or component found to 
be defective by KaZAM.  
 
CONSUMER MUST PAY ALL LABOR AND TRANSPORTATION CHARGES CONNECTED WITH THE REPAIR OR 
WARRANTY WORK. 
 
How do you receive service? Phone the Customer Service Department (9am - 5pm E.S.T.) at 1-757-452-
3945. All warranty claims should be made to KaZAM, PO Box 734, Virginia Beach, VA 23451 USA. 
 
What rights do you have? This warranty gives you specific legal rights. You may also have other rights 
which vary from State to State. 

Summary of Contents for swoop balance
















Reviews: