background image

 

 

 

 

 

KAZAM SWOOP BALANCE BIKE ASSEMBLY 

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ 

AND KEEP FOR FUTURE REFERENCE. 

 

FOR SERVICE ASSISTANCE CALL 757.452.3945

 

Monday - Friday 9:00 a.m. to 5:00 p.m. Eastern Standard Time 

Congratulations on the purchase of your new Swoop Balance Bike! With proper assembly and 
maintenance it will offer you years of enjoyable riding! 

 
IMPORTANT: 

Carefully read and follow this manual (and any other materials included with this bike) before riding. 
Please retain this manual for future use. If this bike was purchased for a child, it is the responsibility of 
the purchaser to verify that the bike has been properly assembled, and that the user has been properly 
trained and instructed in use of the bike. 
 
This manual is provided to assist you and is not intended to be a comprehensive manual covering all 
aspects of maintaining and repairing your bicycle. The bicycle you have purchased is a complex piece of 
equipment that must be properly assembled and maintained in order to be ridden safely. If you have 
any doubts about the assembly or your ability to properly assemble and maintain the bicycle, you must 
have it assembled and maintained by a professional bicycle mechanic. 
 

DANGER! Failure to properly assemble and maintain your bicycle could result in serious injury 
or death to the rider. 

 

 

ALWAYS WEAR A PROPERLY FITTED HELMET WHEN YOU RIDE YOUR BICYCLE.  

 

DO NOT RIDE AT NIGHT.  

Summary of Contents for swoop balance
















Reviews: