Page 4
Thank you for purchasing this air conditioner. This manual will provide you with information on how to operate, maintain,
and troubleshoot your air conditioner. Following the instructions will ensure the proper function and extended lifespan of
your unit.
Please pay attention to the following signs:
Failure to observe a warning may result in serious injuries. The appliance must be installed in
accordance with national regulations.
Failure to observe a caution may result in injury or equipment damage.
WARNING
CAUTION
WARNING
• Ask an authorized dealer to install this air conditioner.
Inappropiate installation may cause water leakage,
electric shock, or fire.
• The warranty will be voided if the unit is not installed
by professionals.
• If abnormal situation arises (like burning smell), turn off
the power supply and call your dealer for instructions to
avoid electric shock, fire or injury.
• Do not
let the indoor unit or the remote control get
wet. It may cause electric shock or fire.
• Do not
insert fingers, rods or other objects into the air
inlet or outlet. This may cause injury, since the fan may
be rotating at high speeds.
• Do not
use flammable sprays such as hair spray,
lacquer or paint near the unit. This may cause fire or
combustion.
• Do not use means to accelerate the defrosting process
to clean, other than those recommended by the
manufacturer.
• The appliance shall be stored in a room without
continuously operating ignition sources (for example:
open flames, an operating gas appliance or an operating
electric heater.
• The appliance shall be stored to prevent mechanical
damage from occurring.
• Be aware that the refrigerants may not contain an odor.
0.
Safety Precautions
• Compliance with national gas regulations shall be
observed.
• Keep ventilation openings clear of obstruction.
NOTE
: The following information is required for the units
adopt R-32 Refrigerant:
• Do not
pierce or burn.
• A warning that the appliance shall be stored in a well-
ventilated area where the room size corresponds to the
room area as specified for operation.
• Any person who is involved with working on or
breaking into a refrigerant circuit should hold a current
valid certificate from industry-accredited assessment
authority, which authorizes their competence to handle
refrigerants safely in accordance with an industry
recognized assessment specification.
• Servicing shall only be performed as recommended by
the equipment manufacturer. Maintenance and repair
requiring the assistance of other skilled personnel shall
be carried out under the supervision of the person
competent in the use of flammable refrigerants.
• If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
people to avoid a hazard.
Summary of Contents for KPD-105 DR11
Page 16: ......
