22
No.
Parameter displayed on the wired controller during ODU spot check
1
ODU address
2
Outdoor ambient(T4) temperature (°C)
3
T2/T2B average Temp. (corrected) (°C)
4
Main heat exchanger pipe(T3) temperature (°C)
5
Discharge Temp. of compressor A(°C)
6
Discharge Temp. of compressor A(°C)
7
Inverter compressor A current (A)
8
Inverter compressor B current (A)
9
Reserved
10
Fan speed
11
EXVA position/4
12
EXVB position/4
13
EXVC position/4
14
Operating mode
15
Priority mode
16
Total capacity requirement correction of indoor unit
17
Number of outdoor units
18
Total capacity of outdoor unit
19
Inverter-module heatsink Temp. A(°C)
20
Inverter-module heatsink Temp. B(°C) (reserved)
21
Reserved
22
--
23
Plate heat exchanger outlet (T6B) temperature (°C)
24
Plate heat exchanger inlet (T6A) temperature (°C)
25
System discharge superheat degree
26
--
27
Number of operating indoor units (in case of virtual addresses, this is the number of units with
the virtual addresses included)
Summary of Contents for KCT-03 SR
Page 31: ...28 MD18U 003BW 16117100001523 ...
Page 32: ......
