Owner’s manual
11
●
For Duct/Celling Type
Push the grill switches in the directions of the arrows. Then,
open the air-in grill downwards. Turn the air filter fixing block
backwards, and remove the air-in grill.
●
For One-Way Cassette Type
Remove the air-in grille, hold the air-in buckle with two hands and
open the grille downwards, pull it to the inside, and push the filter
buckle to remove the grille.
Air filter
Hold the tabs of the frame, and remove the claws in the four
places. (The special function filter can be maintained by washing
it with water once every six months. We recommend replacing it
once every three years.)
●
For One-Way Cassette Type
(The second generation 18-36 model)
Fig.5-3
Special function filter
Fig.5-8
Fig.5-4
Fig.5-5
●
For Console Type
Push the grill switches in the directions of the arrows. Then,
open the air-in grill downwards. Press the claws on the right and
left of the air filter down slightly, then pull upwards.
● For digital scroll floor standing type
The filter is housed in the lower part of the unit in versions II and
III to take in air from below or from the rear, to remove the filter
in versions II and III, do as follows.
Fig.5-9
It is housed in the front cowl in version I to take in air from the
front.
To remove the filter in version I, do as follows.
Fig.5-10
■
Two-way cassette type
Air Outlet
Selection Switch
Fig.5-6
■ Take off the inhalation grating from the panel.
1) Upright row (non-directional) one side of the inhalation
grating, and putdown the other side, and then slide follow the
arrow’s direction refers to Fig.5-9
2) Loosen the hanger of the putdown side refers to Fig.5-10
3) Open the inhalation grating (about 45°), and remove the
other side, refers to Fig.5-11
Fig.5-7
Summary of Contents for KAYF-22 DN3.0
Page 19: ...WP MDV03U 011SW 16127000000208 ...
Page 20: ......
