Kaysun KAYF-22 DN3.0, Owner'S Manual

Page: 11 / 20

Owner’s manual
9
●
When cooling
Adjust the louver horizontally. ( Refer to Fig.4-
18 )
Table 4-1
●
When heating
Adjust the louver downwards (vertically).( Refer to Fig.4-19 )
Fig.4-18 Fig.4-19
Do not adjust the horizontal louver by hand.
When adjusting by hand, the mechanism may not operate
properly or condensation may drip from the air outlets.
Air is blown via the upper air outlet so it doesn’t directly
blow onto people in Dry mode.
When setting the air outlet selection switch to .
In all modes, air is expelled from the upper air outlet.
Use this switch if you do not want air coming out of the
lower air outlet (when sleeping etc).
■
Adjust the air direction left and right
To change the air direction to the left or right, adjust
the left and right louvers to appropriate positions.
Fig.4-20
To switch between the Auto and Manual mode on the lower air
outlet, turn off and restart the unit for mode renewing.
■
Digital scroll floor standing type
Adjust the louver to improve the cooling or heating effect.
■
Air flow selection
Open the front panel.
How to open the front panel: (Refer to Fig.5-4) .
■
Two-way cassette type
Fig.4-21
Before opening the front panel, turn the machine off and
turn the breaker to OFF.
Do not touch the metal parts on the inside of the indoor
unit, as it may cause injury.
Select the air flow as desired. (Please refer to Fig. 7-2
for the positions)
When setting the air flow selection switch to .
Air conditioner automatically decides the appropriate
blowing pattern depending on the operating mode/
situation.
●
Auto-swing
Press SWING for the louver to swing up and down automatically.
Fig.4-22
CAUTION
CAUTION
CAUTION
Operating
mode
COOL mode HEAT mode
Situation
When the room
is cool or after
running the air
conditioner for
one hour. At the start
of the
operation or
other times
when the
room is not
fully cooled. At times except those below.
(Normal time.) At the start or
when air
temperature is
low.
Blowing
pattern
Air is blown via
the upper air
outlet to equalize
the room
temperature and
so the air doesn’t
directly blow onto
people. Air is blown from the
upper and lower air
outlets for
high-speed cooling
in cooling mode and
for warming the air
in heating mode.
Air is blown via
the upper air
outlet so it
doesn’t directly
blow onto
people.