EN
16
4. Connect the cables between the battery
and the lamp.
FIG. 5
USE
HOW TO USE
1. Press the button on the lamp for two
seconds to switch on or off the lamp.
2. Press the button 1, 2, 3 or 4 times to
change the light mode.
CHARGING
The battery is partially charged on delivery.
Follow the instructions below to charge.
1. Plug the charger into a power point.
2. Connect the charger to the battery. The
red status light goes on to show that the
battery is charging.
3. When the battery is fully charged the
green status light goes on.
NOTE:
• Battery life: 500 charging cycles.
• The battery capacity is reduced by less
than 10% after 500 charging cycles.
• The product is protected from
overcharging, overdischarging and
short-circuiting.
DESCRIPTION
1. Front lamp
2. Batteries
3. Charger
4. O-rings, 2
FIG. 1
LIGHT MODES
Pushbutton
Hours*
Brightness
1
1.5
100%
2
2.5
75%
3
3.5
50%
4
6.5
25%
* Approximate operating time with fully charged
battery.
BATTERY INDICATOR
Colour indicator
Battery status
Green
100~75%
Blue
75~50%
Yellow
50~25%
Red
25~5%
Flashing red
5% - off
MOUNTING
1. Put an O-ring on the lamp.
FIG. 2
2. Fit the lamp on the handlebars with the
O-ring.
FIG. 3
3. Put the band round the tube and firmly
tighten to fix the battery.
FIG. 4
Summary of Contents for 009405
Page 3: ...1 1 2 3 4 2 3 4 5...
