Kayoba 002421, Operating Instructions Manual

Page: 75 / 88

the red light goes off. Press the sensor switch before use.
The blue light goes on to show that the sensor is switched
on. Screw on the cover so that no water gets in.
FIG. 2
Fasten the sensor to a fishing line and cast as usual. The
app starts and you can start fishing.
NOTE:
Do not throw the sensor into water shallower than
30 cm where it can hit stones or other hard objects
and get damaged.
SETTINGS
When the sensor is switched on it can be connected to the
app after about 10 seconds.
1. Click on
Settings .