EN
12
MOUNTING
NOTE:
•
The child seat is mounted behind the
saddle and fastened to the saddle tube
and saddle post.
•
Mount the child seat as far forward as
possible. The child seat has a centre of
gravity marking that should preferably
be in front of the back axle on the bike
and more than 10 cm behind the back
axle.
•
The child seat must not be mounted
tilted forward; risk of child sliding out of
the seat. A slight backward tilt is
recommended.
•
A 5 mm hex key and adjustable spanner
are needed to fit the child seat.
•
Check that all the functions of the bike
are working properly after mounting the
child seat.
FIG. 1
1. Choose a suitable spacer combination for
the saddle tube.
– No spacer is used for a saddle tube
diameter of 36 mm.
– One or more spacers are used for
saddle tube diameters down to 28
mm.
FIG. 2
2. Align the post holder fastener round the
saddle tube at a suitable height and
tighten the screws on the fastener with
the hex key.
FIG. 3
3. Fit the tube arch in the slot underneath
the child seat and firmly tighten with an
adjustable spanner.
FIG. 4
4. Push the tube arch in the fastener as far
as it goes.
SAFETY INSTRUCTIONS
WARNING!
•
Only use the child seat for the purpose
for which it is intended and in
accordance with these instructions.
•
Do not transport baggage in the child
seat – this puts the safety of the cyclist
and child at risk. Extra baggage should
be placed at the front of the bike,
preferably in a basket.
•
Do not modify the child seat in any way.
•
A child seat with a child in it changes the
balance, cycling and braking
characteristics of the bike.
•
Never leave the bike when there is a
child in the child seat.
•
Do not use the child bike seat if any part
of it is damaged.
•
Check before use that the child seat is
intact and undamaged. Replace all
damaged parts before use. Do not exceed
the child seat’s maximum load of 22 kg.
•
Check local regulations for using a child
seat on a bike.
TECHNICAL DATA
• The child seat is intended for children with
a maximum weight of 22 kg.
• The child bike seat is suitable for
mounting on a bike with the following
specifications
– Frame tube diameter 28-36 mm
– Wheel size 24"- 28"
• The child bike seat is approved in
accordance with EN 14344:2004.
• The child seat is intended for children
from 9 months to 5 years old.
Summary of Contents for 001-172
Page 3: ...1 2 3 5 6 4...
Page 4: ...7 8 9 10...
