ASSEMBLY OF THE DEVICE
In order to locate the device near to a wall and partition, kitchen furniture, decorative
coating etc., the said items have to be made of nonflammable
material or coated with an appropriate thermal insulation material in which case the
distance in-between has to be 5 cm or otherwise 20 cm at minimum. It is
recommended that fire protection rules are attached special importance.
All of the below-mentioned items on assembly of the device have to be fulfilled by the
authorized service personnel.
THE MIN. DISTANCE BETWEEN THE TUBE
AND THE DEVICE SHOULD BE 50 CM
* The feet of the undercounter stand onto which the device will be placed have to be adjustable and it has to
be ensured that the device operates on a scale level.
* All gas connections of the device have to be in accordance with ISO 7-1 or ISO 228-1 standards.
* Before gas connection of the device is made by an authorized technical service personnel, its label should
by all means be checked at first and gas connection has to be made according to the specified gas type and
pressure. Connection should not be made for different types of gases and/or pressures.
* Gas connection inlet measures have been defined in THE TECHNICAL SPECIFICATIONS list.
* After connection of the device to the gas system, any gas leakage should by all means be checked using
soap bubble.
* After the device is checked by the authorized service personnel, air adjustment is made if deemed necessary.
* The declared power of the device may by no means be changed as a result of user
requests. All interventions in the valves and the injectors for this purpose shall make
the device out of the scope of the warranty.
* Do not have unoriginal spare parts used in the device. If any
spare parts not provided from our company are assembled into the device, the
device shall be out of the scope of the warranty.
