Kaya Instruments IRON CoaXPress, User Manual

Page: 40 / 43

2 0 H a M e s i l a S t . , N e s h e r 3 6 8 8 5 2 0 , I s r a e l
P O B 2 5 0 0 4 , H a i f a 3 1 2 5 0 0 1 , I s r a e l
T e l : ( + 9 7 2 ) - 7 2 - 2 7 2 3 5 0 0 F a x : ( + 9 7 2 ) - 7 2 - 2 7 2 3 5 1 1
www.kayainstruments.com Page no. 37 | Configuration Interface
6.11 Lens Control
The Lens control allows control over the Focus and Iris and provides general information about the mounted lens.
The Lens Controller currently support Birger and P-Iris adaptors;
Please note that a camera must be ordered with the P-Iris option and P-Iris cable assembly in order for the P-Iris
lens to operate.
6.11.1 Lens Control Parameters
Parameter Description Gen<i>Cam
name
Type Possible values Remarks
Value
Gen<i>Cam
name
Gen<i>Cam Category: LensControl
Lens Selector Selects lens controller LensSelector Enumeration 0 Off
1 Birger
2 P-Iris
Lens
Communication
Source Source for communication to
the lens LensCommSource Enumeration 0 RS232_0
Lens Initiate Initiates lens controller LensInit Command 1 - Activate
Lens Reset Reset lens controller LensReset Command 1 - Activate
Lens Present Indicate if lens is present LensPresent Enumeration 0 No
1 Yes
Lens Name Lens descriptive name LensName StringReg
Lens
Identification Lens type identification LensId StringReg
Lens Serial
Number Serial Number of the lens LensSerialNumber StringReg
Lens Version Firmware version of the lens LensVersion StringReg
Gen<i>Cam Category: LensFocusControl
Focus Move
Near Full Move focus to the infinity stop LensFocusMoveNearFull Command 1 - Activate
Focus Move Far
Full Move focus to the zero stop LensFocusMoveFarFull Command 1 - Activate
Focus Move
Step Define focus move step LensFocusMoveStep Integer
Focus Move
Near Move focus to near position LensFocusMoveNear Command 1 - Activate
Focus Move Far Move focus to far position LensFocusMoveFar Command
Focus Minimum
Position Lens minimum position for
focus LensFocusPositionMin Float