![background image](http://html1.mh-extra.com/html/kawai/mp6/mp6_owners-manual_3983208042.webp)
42
6. M
EN
U
B
ut
to
ns
6.2.32 Bender
This parameter determines if the Bender Wheel is active (On) or not (Off) for the
selected zone.
6.2.33 Bender Range
Int
This sets the Bender Range in semitone steps. The value changes from 0 to 7.
Ext
This is used to transmit Bender Range information to external sound modules.
If MIDI Transmit Control Change is “On”, the value is transmitted when a SETUP
is recalled. The value changes from 0 to 12.
* When the Bender is “Off”, this page won’t be displayed.
6.2.34 Key Range Hi/Lo
These two parameters define the playable key range on the keyboard for the
selected zone. First, while K.Range Hi appears in the display, use the VALUE
buttons to set the highest note that the selected zone can play.
Next, while K.Range Lo appears in the display, use the VALUE buttons to set the
lowest note that the selected zone can play.
Playable Key Range
q
K. Range Lo
q
K. Range Hi
Note:
Another convenient way to input the key range is to hold the ZONE SELECT button
of the desired zone for more than 1 second and input the K.Range Lo by pressing
the lowest key followed by the key of the highest note, while still holding the
ZONE SELECT button.
1
Concert Grand
Bender
= On
1
Concert Grand
Bender
= On
1
Concert Grand
Bendr Rng
=
2
1
Concert Grand
Bendr Rng
=
2
1
Concert Grand
S
K.Range Hi= B4
1
Concert Grand
S
K.Range Hi= B4
1
Concert Grand
S
K.Range Lo= F0
1
Concert Grand
S
K.Range Lo= F0
Summary of Contents for MP6
Page 95: ......