Kawai Concert Performer CP136, Owner'S Manual, Page: 79 / 244

Recording a Song
71
L 1
L 2
L 3
L 4
L 5
F 1 F 2 F 3 F 4 F 5 F 6 F 7
R 1
R 2
R 3
R 4
R 5
2) To enter a note event, play the note using the keyboard. The note data will be displayed
on the screen. Continue entering as many notes as you wish; notice how previously
entered notes continue to be displayed as a list, screen room permitting. The graphic
navigator near the bottom of the screen gives you feedback as to what bar you are in.
3) If you enter a wrong note and wish to delete it, press the L2 button. When you are using
the REPLACE mode for recording, every time you press L2 the list of your entered
notes on the screen scrolls back one event, and that event is erased immediately.
Therefore, if you scroll back to the first beat of bar 5 of a 10-bar list of notes, everything
from bar 5 on will be erased. In OVERDUB mode, however, you can delete only the
most recently added note, and scrolling back over the list using L2 will not automatically
erase events. When using OVERDUB, you need to press the Delete button (R1) to erase
the event.
L2, L3 Moves the cursor up and down the list of
entered notes in OVERDUB mode.
R1 Deletes the last note entered in
OVERDUB mode.
F1 Selects the note value.
F2 Adjusts the note length.
F3 Selects the velocity value. Values are from 1–127 or
Key.
F4 Enters Tied note values.
F5 Enters a rest.
F6 Takes you to the beginning of the next measure.
F7 Stops recording.