Kawai Concert Performer CP136, Owner'S Manual, Page: 76 / 244

Kawai Concert Performer Series Digital Piano
68
L 1
L 2
L 3
L 4
L 5
F 1 F 2 F 3 F 4 F 5 F 6 F 7
R 1
R 2
R 3
R 4
R 5
L1 Selects the track to Punch in on.
L3 Selects the measure in the song from
where you want the CP to start playing.
L4 Selects the measure where the CP will
punch-in and start recording.
L5 Selects the measure where the CP will
punch-out and stop recording.
To use Punch-in recording:
1) Select Punch In/Out in the Advanced Recorder menu.
2) Use the L and R buttons to select the options and change their values using the Dial.
Select AUTO with the R5 button to have the CP automatically handle the punching in/
out while you play.
3) Press the REHEARSAL button (F4, F5) to listen to the song for rehearsal. If you need to
adjust mixing or if you would like to loop the song, use the MIXER (F2) or LOOP ON/
OFF (F6) button.
4) When you are ready to record, press the REC button and then the PLAY button. The
music will start immediately from the Start Bar that you have chosen. Once the song
reaches the Punch In Bar, any notes that you play on the keyboard will be recorded.
Recording will stop when the song reaches the Punch-Out Bar, but the CP will keep
playing back the song to the end unless you press the STOP button.
You can repeat the punch-in/out section by turning the looping on with the F6 button.
5) Listen to what you have recorded and re-record if necessary.
R1 Changes the time signature.
R2 Changes the tempo.
R3 Selects the recording mode. REPLACE
erases the previous data and records the
new data in its place. OVERDUB mixes
the new data with the previous data so
that both are heard together. Repeatedly
pressing the R3 button switches between
the REPLACE and OVERDUB.
R5 Selects the Punch-in method, Auto or
Pedal. Repeatedly pressing the R5 button
switches between the Auto and Pedal.
F1 Takes you to the Advanced Recorder menu.
F2 Takes you to the Mixer Settings menu.
F4, F5 Plays the song for rehearsal.
F6
Turns Loop on/off.