Kawai Concert Performer CP136, Owner'S Manual, Page: 77 / 244

Recording a Song
69
L 1
L 2
L 3
L 4
L 5
F 1 F 2 F 3 F 4 F 5 F 6 F 7
R 1
R 2
R 3
R 4
R 5
F1 Takes you to the Advanced Recorder menu.
F2 Takes you to the Mixer Settings menu.
F4, F5 Plays the song for reharsal.
F6
Turns Loop on/off.
R1 Changes the time signature.
R2 Changes the tempo.
R3 Selects the recording mode. REPLACE
erases the previous data and records the
new data in its place. OVERDUB mixes
the new data with the previous data so
that both are heard together. Repeatedly
pressing the R3 button switches between
the REPLACE and OVERDUB.
R5 Selects Auto or Pedal as the Punch-In
method. Repeatedly pressing the R5
button switches between the Auto and
Pedal.
L1 Selects the track to Punch in.
L3 Selects the measure in the song from
where you want the CP to start playing.
• If you set the CP to Punch-In at the very first measure of the song, the metronome will automatically
play a two-measure intro to assist you with the timing. These “ticks” will not be recorded as part
of the track.
Punch-In recording using the pedal
Instead of specifically setting an automatic Punch-In and Punch-Out Bar, you can use the centre
pedal to manually Punch In and Out.
• You can punch in and out with pedal one time for each pass over the track that you make.
To use the pedal to Punch-In/Out:
1) Use the R5 button to select Pedal in the Punch In/Out menu.
2) Use the L and R buttons to set up other recording options.
3) Press the REC button to start. The song will start playing.
4) When the song reaches the bar where you wish to punch in, press the centre pedal and
play the keyboard.
5) When you reach the bar where you wish to punch out, press the pedal again to stop
recording. Notice that the song keeps playing to the end (it’s just no longer recording)
or until you press STOP.