10
Pre
pa
ra
ti
on
B
efore
U
se
Part Names and Functions
Operation Guide
The separate Operation Guide provides a convenient overview of the CN27 digital piano’s various button and keyboard controls .
a
POWER button
This button is used to turn the CN27 digital piano on/off .
Be sure to turn off the instrument after playing .
To prevent data loss when turning off the instrument, do
not disconnect the power cable until
is shown in
the LCD display .
b
MASTER VOLUME slider
This slider controls the master volume level of the CN27 digital
piano’s built-in speakers or headphones, if connected .
c
LED Display
The LED display provides important information relating to
the currently selected function and various other values .
* A protective plastic film is attached to the display during production .
Please remove this film before attempting to play the instrument .
d
CONCERT MAGIC button
This button is used to start/stop playback of the CN27 digital
piano’s built-in Concert Magic songs .
e
LESSON button
This button is used to select the CN27 digital piano’s built-in
Lesson songs .
f
PLAY / STOP button
This button is used to start/stop the playback of Recorder
songs stored in memory and CN27 digital piano’s built-in
Lessons songs .
g
REC button
This button is used to record performances to the CN27 digital
piano’s internal memory .
h
METRONOME button
This button is used to turn the metronome function on/off, and
also to adjust its tempo, time signature, and volume settings .
i
SOUND SELECT button
This button is used to select the sound(s) that will be heard
when the keys are pressed .
j
PEDAL connector
This connector is used to connect the CN27 digital piano’s
pedal board to the instrument .
k
DC IN jack
This jack is used to connect the AC adaptor .
l
USB to Host port
This port is use to connect the instrument to a computer using
a USB ‘B to A’ type cable in order to send and receive MIDI data .
m
MIDI IN / OUT jacks
These jacks are used to connect the CN27 digital piano to
external MIDI devices, such as other musical instruments or a
computer, in order to send and receive MIDI data .
n
PHONES jacks
These jacks are used to connect stereo headphones to the
CN27 digital piano . 1/4” and 1/8” connectors are provided for
convenience, and both can be used simultaneously, allowing
two pairs of headphones to be connected at the same time .
a
b
e
d
f
h
i
j
k
m
l
g
n
c