![background image](http://html1.mh-extra.com/html/kawai/ce220/ce220_owners-manual_3730120060.webp)
60
Ap
p
e
n
d
ix
Please read these assembly instructions thoroughly before attempting to assemble the CE220 digital piano.
Please ensure that two or more people work on assembling the CE220 digital piano, especially when lifting
the main body of the instrument onto the stand in step 3.
Included parts
Before attempting to assemble the CE220 digital piano, ensure that all parts below are included.
A Phillips-head screwdriver (not included) will also be required in order to assemble the instrument.
e
Screw (with flat washer and
spring washer) x 4
f
Tapping screw (long, black) x 4
i
Power cable x 1
g
Tapping screw (mid, black) x 4
h
Tapping screw (short, silver) x 4
c
Back board x 1
a
Main body x 1
b
Side panel x 2
(left, right)
d
Pedal board x 1
Pedal support bolt x 1
1. Assembling the side panels
b
, pedal board, and pedal support bolt
d
Unfasten and extend the pedal connection cable attached to
the bottom of the pedal board
d
.
Insert the pedal support bolt approximately 1 cm into the pedal
board, using the hole shown in the diagram.
Attach the pedal board
d
to the left and right side panels
b
using the temporary mounting screws located on either end of
the pedal board. Ensure that the correct side panel is used for
the left and right side.
Ensure that the pedal board and side panels make close contact,
and that there are no large gaps between the assembled parts.
Insert the four short silver tapping screws
h
into the holes as
shown, and securely fasten the pedal board to the left and right
side panels.
2. Attaching the back board
c
Allow the assembled pedal board and side panels to stand
upright (vertically) on the floor.
Fasten the back board
c
to the left and right side panels using
the four long black tapping screws
f
, leaving a tightening
allowance of approximately 1-2 mm. Then attach the bottom
of the back board to the pedal board using the four mid-length
black tapping screws
g
.
Temporary
mounting screw
Pedal cable
Pedal support bolt hole
h
d
b
Assembly Instructions
f
g
f
g
Summary of Contents for CE220
Page 8: ...8 ...