Setting and saving the response sensitivity
▶ Turn on the power switch on the control unit.
▶ Start the working device at a speed of 5,000 to 7,000 rpm and keep it running
while performing the setting.
Case 1: LEDs do not light up
▶ Briefly press the "Plus" ⑤ button several times until all LEDs ② light up.
Case 2: All LEDs light up
▶ Briefly press the "Minus" ④ button several times until all LEDs ② go off.
▶ Briefly press the "Plus" ⑤ button several times until all LEDs ② light up.
▶ Press the "Automatic" ③ button.
The values are saved.
The unit is in "normal mode" again.
Instructions for use SMARTair/plus FLEXspace Typ 5230/5231
6 Operation | 6.6 Setting the response sensitivity
29/42
