▶ Place the fan box ② on the floor.
▶ Attach the extraction hose ①.
▶ Plug in the power line ⑤ and ⑥ and Sub-D plug ④.
▶ Adjust the voltage selection switch ③ to the national mains voltage.
Connect the SMARTair (plus) FLEXspace to the unit
Note
When using the control cable (
Mat. no. 1.000.7198
), do not run a connecting line.
In addition, the response sensitivity must not be adjusted.
Note
Only units with a maximum 500 W output may be plugged in.
▶ Connect units without a control output ① via a connecting line ③ to the
SMARTair.
or
▶ Connect units (such as the K-Control) with a control output (3.5 mm socket)
via a control cable (Mat. no. 1.000.7198) ② to the SMARTair.
Instructions for use SMARTair/plus FLEXspace Typ 5230/5231
4 Assembly | 4.2 Assembly
20/42
