KaVo KEY Laser III 1243, Instructions For Use Manual

Page: 92 / 103

Instructions for use KEY Laser III 1243
8 Faults
|
8.3 Faults
8.3 Faults
When a fault message is displayed on the touchscreen, the unit automatically swit‐
ches off after 30 seconds.
▶ You should therefore switch the unit on again.
Note
If a fault message appears on the touchscreen again, the content of the fault mes‐
sage should be noted and the responsible service (see Section A 1.5 After Sales
Service) should be informed.
In the event of fault message, first check whether the trigger is operated or was
operated on switching on the KEY Laser 1243.
▶ Disable trigger operation.
▶ Switch unit back on.
If the fault message appears on the touchscreen again, contact the service.
Note
In the case of safety-relevant faults, the unit switches off in a period of milliseconds.
There is no possibility for any information on the touchscreen.
90/99