KaVo ELECTROmatic C, Instructions For Use Manual

Page: 73 / 78

Instructions for use ELECTROmatic M/C and PM/PC
12 Information about electromagnetic compatibility | 12.3 Guidelines and manufacturer's statement - Electromag-
netic immunity
Interference im-
munity tests IEC 60601 test
levels Compliance level Electromagnetic environment
- Guidelines
Electrostatic discharge
(ESD) according to
IEC 61000-4-2 ± 8 kV contact dis-
charge
± 15 kV atmospheric
discharge ± 8 kV contact dis-
charge
± 15 kV atmospheric
discharge Floors should be made of wood
or concrete or be fitted with
ceramic tiles. If the floor is fitted
with synthetic material, the relat-
ive humidity must be at least 30
%.
Fast transient elec-
trical interference /
bursts according to
IEC 61000-4-4 ± 2 kV for power lines
± 2 kV for input and
output lines ± 2 kV for power lines
and input and output
lines The quality of the supply voltage
should correspond to that of a
typical business or hospital envir-
onment.
Surges according to
IEC 61000-4-5 ± 1 kV push-pull
voltage
± 2 kV common mode
voltage ± 1 kV push-pull
voltage
± 2 kV common mode
voltage The quality of the supply voltage
should correspond to that of a
typical business or hospital envir-
onment.
Voltage interruptions,
short-term interrup-
tions, and fluctuations
of the supply voltage
according to IEC
61000-4-11 0 % / 0.5 cycles
at 0º to 315º in 45º
increments
0 % / 1 cycle
70 % / 25 cycles
0 % / 250 cycles 0 % / 0.5 cycles
at 0º to 315º in 45º
increments
0 % / 1 cycle
70 % / 25 cycles
0 % / 250 cycles The quality of the supply voltage
should correspond to that of a
typical business or hospital envir-
onment.
Magnetic field at a
supply frequency
(50/60 Hz) according
to IEC 61000-4-8 30 A/m 30 A/m Magnetic fields at the mains fre-
quency should correspond to the
typical values in a business and
hospital environment.
12.3 Guidelines and manufacturer's statement -
Electromagnetic immunity
The ELECTROmatic is intended for use in an environment of the kind specified
below. The customer or user of the ELECTROmatic should make sure that the
device is used in an environment of the specified type.
73 / 78