WARNING
Use of unauthorised cutters or grinders.
Injury to the patient or damage to the medical device.
▶ Observe the instructions for use and use the cutter or grinder properly.
▶ Only use cutters or grinders that do not deviate from the specified data.
CAUTION
Injury from using worn drill bits or burs.
Drill bits or burs could fall out during treatment and injure the patient.
▶ Never use drill bits or burs with worn shafts.
CAUTION
Danger of injury from cutters or grinders.
Infections or cuts.
▶ Wear gloves or fingerstalls.
CAUTION
Hazard from defective chucking system.
The cutter or grinder could fall out and cause injury.
▶ Pull on the cutter or grinder to check that the chucking system is okay and
the cutter or grinder is securely held. When checking, inserting and remov‐
ing, use gloves or a fingerstall to prevent an injury or infection.
▶ Forcefully press the push button with your thumb and simultaneously insert
the cutter or grinder all the way.
▶ Check that the cutter or grinder is seated by pulling on it.
5.4
Removing the milling tool or diamond grinder.
WARNING
Hazard from rotating cutter or grinder.
Lacerations and damage to the chucking system.
▶ Do not touch rotating cutter or grinder.!
▶ Never press the press-button while the cutter or grinder is rotating!
▶ Remove the cutter or grinder from the contra-angle handpiece after treat‐
ment to avoid injury or infection while storing it.
▶ After the cutter or grinder has stopped rotating, press the press-button with
your thumb and simultaneously pull out the drill bit or bur.
Instructions for use SMARTtorque LUX S619 L - 1.008.1641 SMARTtorque Mini LUX S615 L - 1.008.1643
SMARTtorque S619 C - 1.008.1642
5 Operation | 5.4 Removing the milling tool or diamond grinder.
10/21
Summary of Contents for 1.008.1641
Page 24: ......
Page 25: ...1 008 1927 kb 20111124 03 en ...
