KaVo 1.007.0150, Instructions For Use Manual

Page: 22 / 28

Instructions for use INTRA LUX Motor KL 703 LED – 1.007.0150
7 Reprocessing steps in accordance with ISO 17664-2 | 7.3 Automated reprocessing
22 / 28
4
If there is any residual moisture after cleaning and disinfecting, soak up the
residual moisture with a soft cotton cloth and then wipe dry.
4 Carefully apply low doses of compressed air to the inside and outside of the
disassembled sleeve until no droplets of water are visible any longer.
7.3 Automated reprocessing
Not applicable.
7.4 Care products and systems - Servicing
The bearing sites of the motors are provided with a high-quality, lifelong lubric-
ation.
CAUTION
Improper service and care.
Risk of injury.
4
Service regularly with suitable agents.
CAUTION
Excess care products leaking from the contra-angle handpiece (oil, cleanser and
disinfectant) can penetrate into the motor and cause it to malfunction.
4
Please make sure to always follow the care instructions supplied with the in-
struments.
4
Unscrew the sleeve turning it counterclockwise and pull it off from the front
of the motor.
4 Wipe off the inside and outside of the sleeve with a wet cloth once a week.
4
Wipe off the outside of the motor without the sleeve using a dry cloth.
7.5 Packaging
NOTE
The sterile goods package must be large enough to accommodate the product
without stretching the packaging. The quality and use of the packaging of the
items to be sterilised must meet the applicable standards and be appropriate
for the sterilisation process!
4 Seal the medical device separately in a sterile pack.