Instructions for use INTRA Motorhandstück PROPHYwiz 181 P - REF 1.003.2278
5 Operation | 5.1 Connecting the motor handpiece to the supply hose
5 Operation
5.1 Connecting the motor handpiece to the supply hose
▶
Attach plug-in fitting
①
to the motor connection and screw tight in clock-
wise direction using the sleeve
②
.
Note
Details on the hose coupling can be obtained from the manufacturer.
5.2 Attach the prophylaxis head
Note
All prophylaxis heads with a Doriot connection can be attached.
The clamping system is designed for drive shafts in accordance with EN ISO
1797 part 1 and part 2 for shaft diameters from 2.3 to 2.35 mm.
CAUTION
Use of impermissible prophylaxis heads.
Injury to the patient or damage to the medical device.
▶
Comply with the manufacturer instructions and use the prophylaxis heads
properly.
▶
Only use prophylaxis heads that do not deviate from the specified data.
CAUTION
Damaged prophylaxis head.
Injuries.
▶
Check the prophylaxis head for damage before each use.
▶
See the manufacturer's instructions for use.
NOTICE
Rotating prophylaxis head.
Damage to the chucking system.
▶
Never attach or remove the prophylaxis head while the device is rotating.
▶
See the manufacturer's instructions for use.
▶
Attach the prophylaxis head to the handpiece proceeding in axial direction
until it hits the stop.
▶
Before the start of treatment, check if the seat is secure by pulling on the
head.
11 / 22
