KaVo 0.571.0371, Instructions For Use Manual, Page: 16 / 21

6.4.1 Manual disinfection of the the exterior
KaVo recommends the following products based on material compatibility. The
microbiological efficacy must be ensured by the disinfectant manufacturer.
▶ Mikrozid AF made by Schülke & Mayr (liquid or cloths)
▶ FD 322 made by Dürr
▶ CaviCide made by Metrex
Consumables required:
Cloths for wiping off the medical device.
Spray the disinfectant on a cloth, then wipe down the medical device and allow
the disinfectant to act according to the instructions of the disinfectant manufactur‐
er.
Note
Follow the instructions for use of the disinfectant.
6.4.2 Manual disinfection of the interior
For the effective re-preparation, the inside of the device must be cleaned auto‐
matically in a cleaning and disinfection unit in accordance with ISO 15883-1.
The interior of this product is not designed for manual disinfection.
6.4.3 Mechanical disinfection of the exterior and interior
Note
Before setting up, screw the SONICflex tips clockwise onto the SONICflex instru‐
ment.
KaVo recommends thermodisinfectors in accordance with ISO 15883-1,
e.g. Miele G 7781 / G 7881.
(Validation was performed with the program "VARIO-TD", the cleaner "neodisher
®
mediclean", the neutraliser "neodisher
®
Z" and rinse "neodisher
®
mielclear" and
only refers to the material compatibility with KaVo products.)
Note
Insert the instrument with tip screwed on into the adapter for interior cleaning in
the thermodisinfector (e.g. Miele accessories for dental silicon adapters).
▶ The program settings and cleansers and disinfectants that must be used can
be found in the instructions for use of the thermodisinfector.
Instructions for use For SONICflex tips paro - REF 0.571.0371, paro A - REF 1.006.2020
6 Preparation methods according to ISO 17664 | 6.4 Disinfection
14/17