6
THE KIT CONTENTS
Part
Building Plan No. Qty.
Fuselage Block – 8 mm Ceiba
plywood
(25)
1
Building Plan
1
Instruction Manual
1
Vlies Tissue Sheet
3
Sand Paper Fine & Coarse
1+1
Stick Bundle
Fuselage stick - spruce 3x8x450
mm
(23)
2
Wing Leading Edge - balsa
7x7x410 mm
(2)
2
Wing Trailing Edge - balsa
14x4,5x410 mm
(3)
2
Wing Main Spar - spruce
3x8x410 mm
(5)
2
Spruce Stick 3x5x410 mm
(11, 13)
2
Small Parts Bag A
Fuselage Side Cover
(33)
2
Side Spacer
(22)
2
Balsa Spacer 3x8x75 mm
(24)
1
Balsa Rudder
(30)
1
Beech Dowel Φ3x30 mm
(35)
1
Bamboo Dowel Φ2.5x22 mm
(34)
1
Rear Hor. Tailplane Seat - Balsa
Φ3x9x12 mm
(39)
1
Hor. Tailplane Seat - plywood
1mm - 25x15 mm
(26)
1
Spruce Stick 3x5x25 mm
(27)
1
Tail Boom Cross-brace – Balsa
6x8x20 mm
(38)
1
Skid
(40)
1
Towhook
(36)
1
Wood Screw
(37)
2
Rudder Hinge (brass tin)
(29)
2
Ballast Φ20x8 mm
(32)
1
Small Parts Bag B
Fin
(28)
1
Wing Seat Plate
(20)
1
Balsa Stick 3x5x120 mm
(21)
2
Part
Building Plan No. Qty.
Wing Root Rib (bevelled)
(4)
1+1
Wing Tip
(7)
2
Wing Joiner „V“
(8)
2
Gusset
(6)
8
Small Parts Bag C
Wing Rib
(1)
20
Small Parts Bag D
Balsa Stick 3x5x59 mm
(14)
8
Balsa Stick 3x5x69 mm
(15)
2
Balsa Centre Plate 3x20x59 mm
(12)
1
Bamboo Dowel Φ2.5x40mm
(16)
1
have to slow down and wait until the model returns
to the original straight path. Hi-start requires some
skills; especially on a windy day running too fast might
even end in destruction of your model. Once the mode
climbs almost over your head, it should start turning
slightly left – this is the moment to stop. Let the model
fly in front of you and release the towline.
For the initial high start, set the towhook to the for-
ward position. Based on the DINGO´s behaviour you
can move it back/adjust later. If your model hesitates
to climb, move it back; if pitches the nose up and veers
to side, move it forward. Adjust the rudder to achieve
large flat left turns; tight banked turns kill the altitu-
de! Usually, just 2 mm left offset is OK. Contest flyers
would want to install the dethermalizer with a timer
that kicks the horizontal tailplane up (about 45°) once
the set time has elapsed; the model will land in large
„hoops“ then.
Have a ball, enjoy your DINGO!
KAVAN Team
