Operating Manual
8
Original Operating Manual
3.2
Rotating clamp with mounting
A Rotating Clamp consists of a clamp body (1) on which conduits (2) are mounted. Cylinders (4)
move the conduits (2) which are equipped with sliders (3). The clamping body (1) is mounted on a
flange (5) that is bolted to a rotary joint (6). There is a drive (8) on the base plate (7) consisting of a
bevel gear, gear box and hydraulic motor (9) attached. This combination is attached to the fork
carriage of the lift truck with upper (10) and lower brackets (11). A central catch (14) bolted to the
base plate (7) prevents the rotator being deflected off the fork carriage of the lift truck.
The optional side shift (12) is equipped with support rollers (13) and is bolted onto the base plate (7).
3.3
Proper use of the equipment
Rotating roll clamps are designed to rotate loads such as paper rolls, concrete pipes, etc. The
rotation can be continuous or limited to 180°, to the left or right as required. The optional side shift is
designed for moving loads that are
free of the ground
(at least 10 cm high).
Proper use of the machine and/or equipment includes the following:
Observance of the operating manual at all times.
Observance of the technical data on the identification plate on the attachment.
Adherence to the specified inspection and maintenance instructions.