Operating Manual
20
Original Operating Manual
Replace worn forks (8) by demounting screw (6), washer (31) and nut (7). Replace
worn forks (8) and mount bolt (6), washer (31) and nut (7). Ensure that the bushes
(30) are present.
Replace wear plates (33) by removing bolt (6), washer (31), nut (7), and bushing (30)
of the fork (8). Remove bolt (32) in slide (9), and replace wear plate (33). Reinstall
bolt (32), bushing (30), fork (8), bolt (6), washer (31), and nut (7). Ensure that the
bushes (30) are installed.
Replace wear plates (39) by removing the linchpin (34) of the pin (35) from the fork
(36). Pull the pin (35) out to the side and the fork (36) to the front of the support (37)
of the clamping body (5). Remove screw (38) and pin (40) and replace wear plate
(39). Reinstall screw (38) and pin (40), insert the fork (36) into the support (37) of the
clamping body (5) from the front, insert the pin into the fork (36) from the side, and
secure it using the linchpin (34).
Take forks out of service if the wear represents more than 10 % of the original
thickness of the fork.
Deformed forks are not safe to operate and must be excluded from further use.
Truing the forks may only be undertaken by the manufacturer of the forks or by a
company authorised by the manufacturer.
6.3.4 Mounting with sideshift
1, 12
8
7
11
6
4
5
10
9
1
3
8
12
2
