Operating Manual
14
Original Operating Manual
5.2
Load handling
Set the forks to the necessary opening range for the size of the kegs.
Position the mast vertically and take up the load parallel to the floor. Move in the
direction of the drums as far as possible.
Only transport stable drums.
Raise the load about 300 mm and tilt the mast backwards.
Centre the load to the middle of the lift truck during take-up and transport.
5.3
Driving
Ensure that the drums and pallets are in a proper state.
Use a load stabiliser to secure the load when moving multiple layers.
Do not drive with the mast tilted forward.
Take care when driving that neither the attachment nor the load comes into contact
with the ground.
Driving with the load stabiliser opened may cause damage to supporting components.
During driving, make sure that the load stabiliser either abuts on the load or is closed
completely.
6.
Maintenance and servicing
6.1
General
Regular maintenance is essential to ensure reliable operation and long service life of the KAUP
attachment
.
Ensure that maintenance and servicing are performed by qualified and authorised
personnel only.
Lubrication and cleaning work on the attachment may also be performed by the lift truck
operator.
Perform maintenance and servicing work only when the attachment is parked securely
on a stable, level foundation. For installing and removing, it is recommended to use a
pallet to take the attachment. The attachment can thus be securely placed and
transported.
Pay attention to a sufficient load-carrying capacity of the lifting means.
