Operating Manual
Original Operating Manual
13
Make the settings in the numerical sequence and in the direction of the arrows.
The pressure indication on the manometer gauge drops after clamping.
This is
not
a malfunction of the attachment, being caused by the installation of a
transmission
5.
Operation
5.1
General
At least once per working shift, the machine and equipment must be inspected for
visible damage and defects.
Repeat faults to your superior and have them rectified without delay.
Be aware of persons present in the area where you are working or driving and ensure
that they are not endangered.
Do not transport any load exceeding that specified on the residual load plate for the
particular combination of lift truck and attachment.
Operate the sideshifter only with the load raised freely (10 cm).
Close the load stabiliser to its smallest position for an empty run.
Ensure that fork arms and arms that clamp a load are closer together at the tips than
at the back. As a result you need a larger clearance for moving in.
