Safety Instruction
· Please read this manual carefully, also with related manual for the
machinery before use the controller.
· For installing and operating the controller properly and safely,
qualified personnel are required.
· Please try to stay away from arc welding equipment, in order to avoid
electromagnetic interference and malfunction of the controller.
· Keep in room bellow 45° and above 0°
· Do not humidity below 30% or above 95% or dew and mist of places.
· Install the control box and other components, turn off the power and
unplug the power cord.
· To prevent interference or leakage accidents, please do the ground
work, the power cord ground wire must be securely connected to an effective
way to earth.
· All parts for the repair provided by the Company or approved before
use.
· Performing any maintenance action, you must turn off the power and
unplug the power cord. There are dangerous high voltage control box, you must
turn the power off after one minute before opening the control box.
· This manual marked with the symbol of the Department of Safety
Precautions must be aware of and strictly adhered to, so as not to cause
unnecessary damage.
1. Installation Introduction
1.1Product specifications
Product Type: ASD58-55
；
ASU58-55
；
ASD58-75
；
ASU58-75
；
AHE58-55; Supply
Voltage: AC 220 ± 20% V;
Power frequency: 50Hz/60Hz;
Maximum output power: 550W;
1.2 Interface connection
The foot pedal and the head of each connecting plug into the socket on the corresponding controller behind,
each socket name as shown in Figure 1-2.Attached, please check whether the plug is inserted.
1
