30
At the same time, press + key together and hold, set the parameters into the interface,
P01-P016 will appear. You can set different parameter. By pressing the power key, you can swith to
the next parameter setting.
Press and hold + keys together again to exit the setting status, or wait for 8 seconds to exit
automatically. Set parameters will be saved when exiting.
FACTORY SETTING OR DISPLAY SCREEN
Backlight brightness. Level 1 is the darkest. Level 3 is the brightest
Mileage unit, 0 (km); 1 (mile)
Voltage Level, The default is 36 V
Sleep time in minutes
For service use only
Wheel diameter Unit (inch) ; Accuracy (0.1)
Tachometer magnet number, Range (1-255)
Speed Limit Range in percentage. 100% means no speed limit
0 = immediate start, 1 = Security start (push and go)
For service use only
For service use only
For service use only
For service use only
Controllers current limit setting, default 12 A, range: 1 - 20A
Controller under voltage value (locked)
ODO clear setting. press and hold the key for 5 seconds, ODO will be cleared.
P1
P9
P5
P3
P7
P2
P10
P11
P12
P13
P14
P15
P16
P6
P4
P8
PARAMETER SETTING
