29
POWER SWITCH
Long press of the power button will turn on the Moovi.
If the Moovi is not used for three minutes, it will turn off automatically.This is a manufacturers setting
which can easily be changes in parameter setting No. 4.
SPEED CONTROL
Press the right thumb accelerator, the more you press downward, the faster you go.
BRAKE CONTROL
Press the left thumb electronic brake; the more you angle downwards, the more you brake.
For instant stop, use the back fender brake and front brake together with the electronic brake.
RIDING LIGHTS
To turn on the lights, press and hold the set key (4) button
until the lights turn on. To turn them off, press and hold the set key again.
MILEAGE DISPLAY
When the power is turned on, the LCD shows ODO, for the total mileage.
If you press the power button again, the recent trip will be displayed.
EMERGENCY BRAKE
In an emergency, apply the rear brake simultaneously with the left thumb brake and the hand brake.
In this way, the rear friction brake and the electromagnetic brake are activated simultaneously,
together with the drum brake. Please use the hand brake carefully and only to support the other
brakes.
All brakes can get hot after activation.
and must not be touched under any circumstances.
OPERATING INSTRUCTIONS
Set
Wear
The mechanical brake consists of an aluminium bracket,
which is mounted on coefficient of friction of the rubber
wheel is adjusted. The wear limi is reached when the brake teeth
(coloured red) are no longer visible or the tire has no tread.
Even if there is still sufficient braking effect when the tyre is completely worn,
the aluminium bracket must still be replaced. In this case please contact the
Moovi Support Team. The recuperation brake is electric and therefore does not wear out.
However, the function should be tested at low speed before each ride.
