Panel description
05
www.katusensor.com
SP1 switch signal light
4 digit LED digital display
Up/down key
SP2 switch signal light
Unit indicator light
Down/increase key
Confirm/exit key
Electrical connection
! Wiring must be done by a qualified electrician and the national and international
codes for the installation of electrical equipment must be followed.
The supply voltage shall comply with EN 50178, SELV and PELV standards
Cut off the power
Connect the product according to the corresponding wiring method in the figure below
1
5
4
2
3
1
2
3
4
5
brown
white
blue
black
grey
Power
Switch output SP2 (analog)
Power supply -
Switch output SP1 (IO-Link)
Analog output (voltage or current)
Level 2 menu
res
factory data reset
Hold down [+] to restore factory Settings
ou1
Switch 1 signal: (Factory default is HNO)
Hysteresis function: HNO (normally open) /HNC (normally closed)
Window function: FNO (normally open) /FNC (normally closed)
Hold down [+] or [-] for at least 1s. After 1 second: The setting value can be changed:
At the press of a button, the value increases; Hold the button down and the value will keep changing.
ou2
Switch 2 signal: (Factory default HNC)
Hysteresis function: HNO (normally open) /HNC (normally closed)
Window function: FNO (normally open) /FNC (normally closed)
Hold down [+] or [-] for at least 1s. After 1 second: The setting value can be changed:
At the press of a button, the value increases; Hold the button down and the value will keep changing.
ds1
The opening delay of OUT1. (The factory default is 0s)
Hold down [+] or [-] for at least 1s. After 1 second: The setting value can be changed:
